Panasonic AU-EVA1 - Power Supply and Battery Management

30
3-1-5. LED & FAN
Menu item
Description
Value (factory default setting
underlined)
TALLY LED
Set the tally lamp to be used
during recording.
FRONT, REAR, BOTH, OFF
ACCESS LED
Set the access lamp to be used
when accessing memory card.
ON, OFF
POWER LED
Set the power indicator to be used.
ON, OFF
FAN SPEED
Set rotation mode of the cooling
fan.
AUTO: Adjust rotation speed in
response to inside temperature of the
unit.
FULL: Rotate at a constant speed
3-1-6. LCD
Menu item
Description
Value (factory default setting
underlined)
BRIGHTNESS
Adjust the brightness of the LCD
monitor.
-15 -- 0 -- 15
COLOR LEVEL
Adjust the saturation level of the
LCD monitor.
-15 -- 0 -- 15
CONTRAST
Adjust the contrast level of the
LCD monitor.
-30 -- 0 -- 30
BACK LIGHT
Adjust brightness of the backlight
of the LCD monitor.
-1 , 0 , 1
3-1-7. CLOCK
Menu item
Description
Value (factory default setting
underlined)
CLOCK
SETTING
Set the built-in calendar.
---
TIME ZONE
Set time difference to the calendar
information.
-12:00 -- +13:00
DATE FORMAT
Set date format.
Y-M-D , M-D-Y , D-M-Y
3-1-8. INFORMATION
Menu item
Description
Value (factory default setting
underlined)
VERSION
MODEL
Display product model number
SERIAL NO.
Display serial number
VERSION
Display firmware version
OPERATION
TIME
TOTAL OPERATION
Display accumulated power on time
in hours.
IRIS DIAL
Display accumulated operation (turn)
times of IRIS dial in x100 times.
SENSOR TEMP
Display ambient temperature of the
image sensor in C degree.
Example 000037 = 37°C
USB SERVICE
MODE
For service purpose
---
UPDATE
For firmware update operation
---
3. MENU settings (SYSTEM SETTINGS)