34
3-1-14. WHITE
Value (factory default setting underlined)
Perform Auto white balance
adjustment
Available when VALUE item is set to “AWB
MEMORY” only.
Recall auto white balance
value on a preset table.
ATW, AWB MEMORY, 3200K+0.0GMg,
4300K+0.0GMg, 5600K+0.0GMg,
6300K+0.0GMg
Add an AWB value to the
preset table. (max.12)
Delete a value from the
preset table.
3-1-15. NOISE REDUCTION
Value (factory default setting underlined)
Set amount of reduction in
800 BASE ISO mode.
SMOOTH, NORMAL2 , NORMAL1 , OFF
Set amount of reduction in
2500 BASE ISO mode.
SMOOTH, NORMAL2 , NORMAL1 , OFF
3-1-16. LENS SETTING
Value (factory default setting underlined)
Set the target brightness
level in auto iris mode.
Set the auto iris detection
window.
NORMAL1: Window is set to center
NORMAL2: Window is set to bottom side
CENTER: Window is set to center (spot)
Set a ratio of auto iris control
(peak or average)
0 -- 30 -- 100
Auto iris response becomes sensitive when
increase the value.
Set control direction for the
dial on the hand-grip part.
RIGHT OPEN:
Iris opens when turn the dial outward.
LEFT OPEN:
Iris opens when turn the dial inward.
Adjust offset of focus
position.
Near -20 -- 0 -- 20 Far
3-1-17. IR SHOOTING
Value (factory default setting underlined)
Turn ON/OFF infrared
shooting mode.
3. MENU settings (CAMERA SETTINGS)