Panasonic AU-EVA1 - Troubleshoot (INVALID Error Message)

88
6-5. Troubleshoot (INVALID error message)
Following tables show major causes and ways to cope with “INVALID” error message.
When occurred?
Cause
Remedy
Executed Auto white
balance (AWB)
adjustment.
White balance mode is NOT set to
AWB.
Set CAMERA SETTINGS > WHITE > VALUE > AWB
MEMORY.
Record mode is in IR mode.
Set CAMERA SETTINGS > IR SHOOTING > OFF.
COLOR BARS is being turned ON.
Turn OFF "COLOR BARS" with a user button.
Pressed a user button,
ONE PUSH AF
function assigned.
The lens currently attached does
NOT support auto focus function.
Use lenses support auto focus.
COLOR BARS is being turned ON.
Turn OFF "COLOR BARS" with a user button.
EI mode (ISO or GAIN) setting is too
high, ISO12800 or higher (+20dB or
higher).
When EI mode is "dB"
Set CAMERA SETTINGS > EI > GAIN SELCET > +20dB or
below.
When EI mode is "ISO"
Set CMAERA SETTINGS > EI > ISO SELECT > 12800 or
below.
Pressed a user button,
ATW LOCK (a feature
to stop Auto tracking
white balance control)
function assigned.
ATW is not selected as white
balance mode.
Set CAMERA SETTINGS > WHITE > VALUE > ATW.
NOTE: VALUE item cannot be set to "ATW" while in V-Log
mode. Set SYSTEM SETTINGS > COLOR SETTINGS > MAIN
item to turn OFF the V-Log mode.
COLOR BARS is being turned ON.
Turn OFF "COLOR BARS" with a user button.
Pressed a user button,
Electric Image
Stabilizer (E.I.S.)
function assigned.
SDI RAW output mode is being
turned ON.
Set SYSTEM SETTINGS > SYSTEM MODE >SDI RAW > OFF.
SENSOR MODE is set to "4/3
CROP&MIX 2.2K".
Set SYSTEM SETTINGS > SYSTEM MODE > SENSOR
MODE > S35 5.7K or CROP 4K.
D.ZOOM is being turned ON.
Turn OFF "D.ZOOM" with a user button.
Optical image stabilizer on the lens
is in use.
Turn OFF OIS.
The EVA1 is currently recording (on
built-in recorder and/or external
recorder connected via SDI, HDMI.
The E.I.S function cannot be turned ON/OFF while recording.
Stop recording and try again.
Pressed a user button,
DIGITAL ZOOM
function assigned.
SDI RAW output mode is being
turned ON.
Set SYSTEM SETTINGS > SYSTEM MODE >SDI RAW > OFF
SENSOR MODE is set to "4/3
CROP&MIX 2.2K".
Set SYSTEM SETTINGS > SYSTEM MODE > SENSOR
MODE > S35 5.7K or CROP 4K.
The EVA1 is currently recording (on
built-in recorder and/or external
recorder connected via SDI, HDMI.
The DIGITAL ZOOM function cannot be turned ON/OFF while
recording. Stop recording and try again.
Pressed a user button,
PRE REC function
assigned.
Variable frame rate record mode is
being turned ON
Set CAMERA SETTINGS > FPS > VFR SW > OFF
Record mode is NOT NORMAL
mode.
Set REC SETTINGS > REC FUNCTION > REC MODE >
NORMAL
Slot change is in process.
Wait until slot change process finishes.
The EVA1 is currently recording (on
built-in recorder and/or external
recorder connected via SDI, HDMI..
The PRE REC function cannot be turned ON/OFF while
recording. Stop recording and try again.
PRE REC is under ON (or OFF)
process.
Wait until the change process finishes.
SDI RAW output mode is being
turned ON.
Set SYSTEM SETTINGS > SYSTEM MODE >SDI RAW > OFF
6. Appendix