Panasonic AU-EVA1 - Understanding RAW Output Feature

71
4-9. Understanding RAW output feature
10-bit RAW data output is available for the greatest flexibility in post image adjustment. The RAW
data is output from SDI OUT (RAW data cannot be recorded with the built-in recorder in the EVA1).
Settings to use RAW data output
1. Set output mode in MENU > SYSTEM SETTINGS > SYSTEM MODE > SDI RAW item.
Available maximum frame rate for variable frame rate record (VFR) and view angle vary as
described in the chart below.
SDI RAW menu
Description
Max. fps
S35 5.7K
Use entire active plane of the imager, and output RAW data
from all active pixels (5760x3072).
30fps
CROP 4K
Use a part of the imager, and output RAW data from all active
pixels within the part (4096x2160).
60fps
CROP&MIX 2K
Use a part of the imager, and generate RAW data
(2048x1080) by mixing pixels.
240fps
2. Connect a recorder (support EVA1’s RAW data record) to SDI OUT and record.
*Output data resolution and maximum available frame rate (for variable frame rate record mode)
vary by settings in the chart below.
FREQUENCY
SDI RAW
VFR
23.98p, 24.00p, 29.97p
S35 5.7K (5760x3072 pixels)
1 – 30fps
CROP 4K (4096x2160 pixels)
1 – 60fps
CROP&MIX 2K (2048x1080 pixels)
1 – 240fps
25.00p
S35 5.7K (5760x3072 pixels)
1 – 25fps
CROP 4K (4096x2160 pixels)
1 – 50fps
CROP&MIX 2K (2048x1080 pixels)
1 – 200fps
50.00p
CROP 4K (4096x2160 pixels)
1 – 50fps
CROP&MIX 2K (2048x1080 pixels)
1 – 200fps
59.94p
CROP 4K (4096x2160 pixels)
1 – 60fps
CROP&MIX 2K (2048x1080 pixels)
1 – 240fps
59.94i, 50.00i
No RAW data out available
6G SDI x1
4. Understanding advanced features
S35 5.7K
CROP 4K, CROP&MIX 2K
Image plane