AW-UE80 Update Procedure / Apr.2022
Panasonic Connect Co., Ltd.
7/8
５． The following screen for selecting a file is displayed. Specify the downloaded firmware file
"UPDATE.HDC" and click the [Open] button.
６． [Execute] Push the button and push the [OK] button on the confirmation screen to start the update.
Firmware update takes approx.10 min.
Do not power down or disconnect the LAN cable between the PC and Camera
while updating.
Do not perform any other operations until the version is upgraded.
７． An update completion message will be displayed. ”Process has been completed successfully.”
８． The update is completed by the above procedure. Press [OK] to restart the camera.
To Next Page
Loading...
