The status of this camera can be checked on this page.
[Viewnetcam.com]
• Server: The URL of the “Viewnetcam.com” service server will be displayed.
• Status: The registration status for the “Viewnetcam.com” will be displayed.
• Personal(Camera) URL: The URL of the camera registered for “Viewnetcam.com” will be displayed.
[UPnP]
• Port number(HTTP), Port number(HTTPS): The port number that is set for UPnP port forwarding will be
displayed.
• Status: The port forwarding status will be displayed.
• Router global address: The global address of router will be displayed.
[Self check]
The self check result of the hardware will be displayed.
Note
• Refer to our website (P/E/U model: http://security.panasonic.com/pss/security/support/info.html, BR
model: http://www.panasonic.com.br/netcam) for further information about the contents of the
displayed statuses (relating to the “Viewnetcam.com” service, the UPnP function, or the self check).
18.4 Reset the settings/Reboot the camera [Default
reset]
Click the [Default reset] tab of the “Maintenance” page. (®page 34, page 35)
Operating Instructions 157
18 Maintenance of the camera [Maintenance]
To Next Page
Loading...
