11
Controls and Their Functions
Video monitor
Front panel Rear panel
Rear panel
(→page 13)
Power Supply
(You can switch between AC
and DC (→page 14))
Front panel
(→page 12)
1
Tally Lamp (Red and Green)
Can be lit by a control signal (red tally and green tally) via
GPI.
When both the red and green tally are triggered together,
the lamp lights amber.
2
Protective panel mounting screw holes (4 holes)
Four screw holes have been provided to enable attachment
of a permanent protective panel.
<Note>
The LCD panel is shipped in packaging material to protect it
from damage during unpacking and transportation. Remove
the packaging material before using the monitor.
To Next Page
Loading...
