47
Security Measures
The hard disk lock function only works with the internal hard disk. This function does
not work with the second hard disk or the external hard disk.
Setting the Hard Disk Lock (enabling, disabling)
1 Run the Setup Utility. ( page 88)
2 Using either or , select [Security].
3 Using either or , select [Hard Disk Lock] and press
Enter
.
4 Select [Enable] or [Disable].
To enable the Hard Disk Lock
Select [Enable] and press
Enter
. At [Caution], press
Enter
.
To disable the Hard Disk Lock
Select [Disable] and press
Enter
.
5 Press
F10
and select [Yes], then press
Enter
.
CAUTION
To change your hard disk drive
• Contact Panasonic Technical Support.
• Before changing the hard disk, be sure to set the [Hard Disk Lock] to [Disable].
To Next Page
Loading...
