Panasonic CF-18 Series

94
Setup Utility
NOTE
 When the Setup Utility is started up with the User Password;
• [Set Supervisor Password] and [Hard Disk Lock] will not be displayed.
• [Password on boot], [Setup Utility Prompt], [Boot First Menu] and [User Password
Protection] will be displayed, but cannot be set.
• The User Password can be changed only when [User Password Protection] has
been set to [No Protection]. The User Password cannot be deleted.
 Parameters
(Underline indicates settings at the time of factory shipment.)
Security Menu
Password on boot: [Enable]
XSet Supervisor Password: [Enter]
Setup Utility Prompt: [Enable]
Boot First Menu: [Enable]
Hard Disk Lock: [Disable]
User Password Protection: [No Protection]
XSet User Password: [Enter]
Password on boot Disable
Enable
Set Supervisor Password To the sub-menu
Setup Utility Prompt
*1
Disable
Enable
Boot First Menu Disable
Enable
Hard Disk Lock
*2
Disable
Enable