64
RAM Module
2 Turn the computer over and remove the screws (A), then remove the
cover (B).
3 Insert/Remove RAM module.
Inserting the RAM module
A Slide in the module at an angle.
B Press the module down until the right and left hooks lock into place.
Removing the RAM module
A Gently open the left and right hooks (F).
The RAM module will be raised at an angle.
B Gently remove the RAM module from the slot.
4 Put the cover back in place.
A Insert the cover at an angle, then fit it into place.
B Fasten the screw.
5 Insert the battery pack.( page 57)
B
A
F F
A
B
A
To Next Page
Loading...
