Panasonic CF-20 series

Add geotagging to the Exif data of stillimages.
L. Photo storage folder
Specify the destination of recorded photo data to save. The default value is the “Pictures” folder.
M. Video storage folder
Specify the destination of recorded video data to save. The default value isthe “Videos” folder.
If you specify the FAT32 formatted storage as destination to save, video files cannot be correctly created when the storage data
capacity exceeds 4 GB.
N. Save barcode file automatically
O. Barcode file storage folder
Specify the destination of saved barcode text. The default value isthe “Pictures/Barcode” folder.
P. Character recognition file storage folder
Specify the destination of saved OCR text. The default value isthe “Pictures/OCR” folder.
Q. Self-Timer
Specify the time period untilshooting starts after the button is pressed. (OFF/5 sec./10 sec.)
R. Interval Shooting
When you move the slider to the right, and specify the value except [0], the camera automatically repeats shooting at intervals of spe-
cified seconds. The maximum 10 photos can be shot continuously.
S. Restore default settings
Return allthe settings to the default values.
To close the [Setting] menu, click on the upper left of the screen, or click the preview screen.
N O T E
n To specify the save destination folder, select the folder you have the access right to. If a writing error occurs, change the specified folder.
n
The settings of “New photos and videos will save to:” under “Change where new content is saved” ( (Start) - (Settings) - [System] -
[Storage]) are applied to the “Pictures” folder.
n
The settings of “New photos and videos will save to:” under “Change where new content is saved” ( (Start) - (Settings) - [System] -
[Storage]) are applied to the “Videos” folder.