Attaching/Detaching the Tablet from the Keyboard Base
Detaching the tablet from the keyboard base
When detaching the tablet from the keyboard base while it is turned on, note the following points.
C A U T I O N
n Before detaching the tablet, confirm the following things.
Save the necessary data.
Close files you have opened from removable disks and network drives.
Remove peripheral devices connecting to the tablet.
n Do not detach the tablet in the conditions below.
When the SD Memory Card indicator is on.
When playing/recording audio files or displaying motion video such as MPEG files.
When playing a DVD-Video.
When writing to a disc.
When using communication software or network functions.
To detach the tablet while it is turned on, perform the following.
C A U T I O N
n Before detaching the tablet, check the remaining battery power by pressing the ≪ Fn≫ and ≪ F9≫ keyboard keys at the same time.
When the battery status of the “Battery” (on the tablet) becomes 5 % or less, can not detach the tablet from the keyboard base.
1.
Click in the task tray of the desktop screen, and then click - [Eject Keyboard Base Device].
“Undock Complete” appears at the bottom right of the screen.
The same operation can be performed by pressing the ≪ Fn≫ and ≪ 1≫ keyboard keys at the same time.
N O T E
n To cancel detachment, press the ≪ Fn≫ and ≪ 1≫ keyboard keys at the same time after the above operation.
OS processing by pressing the ≪ Fn≫ and ≪ 1≫ keyboard keys at the same time requires some time. If the keysare pressed in suc-
cession in a short period of time, the key inputs are ignored. If the keyinputs are ignored, wait for a while, and press the ≪ Fn≫ and
≪ 1≫ keyboard keys at the same time again.
2. Release the detach lock (A).
3. Slide the release lever (B) in the direction of the arrow.
To Next Page
Loading...
