5. Insert the nanoSIM card into the nanoSIM card slot.
C A U T I O N
n Do not insert the nanoSIM card upside down.
6. Close the nanoSIM card cover.
7.
Insert the battery pack.( Replacing the Battery Pack)
To remove a nanoSIM card
1. Turn off the computer.
2. Turn over the computer, and then open the cover.
Make sure no foreign objectsare under the computer.
3.
Remove the battery pack. ( Replacing the Battery Pack)
4. Open the nanoSIMcard cover.
5. Push the nanoSIM card.
It will come out of the slot a little bit.
6. Pull the card all the way out as illustrated below.
To Next Page
Loading...
