In the file encryption using the TPM, encryption keys can be stored on a TPM chip separated from the internal disk. Thiswill allow you to increase
the securitylevel.
To use the TPM function, perform the following steps.
For more information about the usage, follow the instructions by a system administrator.
1.
Click (Start) - (Settings) - [Update & Security] - [Device encryption] - [BitLocker settings].
2. Click [TPM Administration].
Windows Hello
Thisfunction is used to sign in to Windows quickly, or perform individual authentication.
<Only for model with camera with IR sensor>
The face recognition for Windows Hellos is supported. To use Windows Hellos, perform the following steps for setup.
1.
Click (Start) - (Settings).
Alternatively, click (Settings) in the tablet mode.
2. Click [Accounts] - [Sign-in options].
3. Click [Set up] under the “Windows Hello”.
4. Follow the on-screen instructions.
N O T E
n To use Windows Hellos, you need to set the password and PIN for sign-in options.
n During face recognition, the IR sensor camera light turns on, and becomes hot. Do not touch the IR sensor section when the
light is on, and shortly after the light turns off.
To Next Page
Loading...
