Panasonic CF-20 series

Fingerprint Security
Can be changed only when [Set Supervisor Password] isset.
Sub menu items:
Sub-Menu Protection
Power-on Security
Enter the sub-menu.
AMT Configuration
Only for model that supports Intel(R) AMT.
Can be changed only when [Set Supervisor Password] isset.
Enter the sub-menu.
Secure Boot
The submenu appears when thisitem isselected.
If you change factory default setting, preinstalled-OS may not operate correctly.
Enter the sub-menu.
Exit Menu
Save Values and Reboot To reboot the system after saving the changes.
Reboot Without Saving Changes To reboot the system without saving the changes.
Save Options
Save Current Values To save the changes for allSetup options.
Load Previous Values To load previous values for allSetup options.
Load Default Values To return the settingsto the default values.
Boot Override
Windows Boot Manager Boot from Windows
Recovery Partition Execute Recovery tools.
Windows Recovery Environment Boot from WinRE
UEFI: PXE IP4 Intel(R) Ethernet Connection (4) I219-LM
[Tablet]
Boot from LAN device (IP4)
UEFI: PXE IP6 Intel(R) Ethernet Connection (4) I219-LM
[Tablet]
Boot from LAN device (IP6)
UEFI: PXE IP4 Realtek USB Ethernet Controller [Key-
board Base]
Boot from LAN device (IP4)
UEFI: PXE IP6 Realtek USB Ethernet Controller [Key-
board Base]
Boot from LAN device (IP6)
Depending on the hardware constructions, some device name are different.
Diagnostic Utility
Execute Diagnostic Utility.