Panasonic CF-AX3 Series

30
Useful Information
Handling and Maintenance
To clean the inside of the dust cover
Clean the inside of the dust cover once a month.
A
Turn off the computer, and disconnect the AC adaptor.
B
Close the display, and turn the computer over.
C
Remove the battery pack.
D
Remove the screw (B), and remove the dust cover (C) in the
direction of the arrow.
E
Clean the inside of the dust cover.
F
After cleaning, reset the dust cover (C), and secure the screw
(B).
CAUTION
l
If dust is piled up inside the dust cover and hard to remove, use an electric cleaner.
Be careful not to inhale dust.
l
Make sure no water or other liquid spills inside the dust cover, and pay attention not to drop
the screw inside the dust cover.
Dispose of Computer

Preparation
l
Remove all peripherals (SD memory card etc.).
l
Erase the stored data. (
è
Reference Manual “Hard Disk Data Erase Utility”)
CAUTION
l
Never disassemble the computer except before disposal.
l
Refer to page 3 for precautions when disposing of the computer.
1. Turn off the computer.
l
Do not use sleep/hibernation.
2. While connecting the battery pack, disconnect the AC adaptor.
3. While pressing the HOLD button, slide the power switch for more than ve seconds.
The built-in battery’s power output stops.
4. Turn over the computer, and remove the battery pack.
BC
CF-AX3mk2_EU_M.indb 30 2013/11/18 12:12:56