Panasonic CF-H2 series

19
Getting Started
 To change the partition structure
You can shrink a part of an existing partition to create unallocated disk space, from which you can create a new
partition.
A
Open “Computer”. Right-click [Computer], then click [Manage].
 To open “Computer”, proceed as follows on the Start screen.
 1. On the Start screen, flick from bottom side to inside of the screen.
 2. Click [All apps] on the app bar.
 3. Click [Computer] under “Windows System”.

Click (Start) and right-click [Computer], then click [Manage].
l A standard user needs to enter an administrator password.
B Click [Disk Management].
C Right-click the partition for Windows (“c” drive in the default setting), and click [Shrink Volume].
l The partition size depends on the computer specications.
D Input the size in [Enter the amount of space to shrink in MB] and click [Shrink].
l You cannot input a larger number than the displayed size.
l To select [Reinstall to the System and OS partitions.] in installing the software (è page 26),
70 GB
*1
/ 60 GB or more is necessary for [Total size after shrink in MB].
E Right-click [Unallocated] (the shrunk space in the step D) and click [New Simple Volume].
F Follow the on-screen instructions to make the settings, and click [Finish].
Wait until formatting is completed.
*1
For MUI OS model, 80 GB or more is necessary.
NOTE
l You can create an additional partition using remaining unallocated space or newly creating unallocated space.
l To delete a partition, right-click the partition and click [Delete Volume] in the step C.
 <For MUI OS model> To select language
To select a language other than the one you have selected during the rst-time operation, follow the steps below.
A Open the Control Panel.
1. Right-click any empty location on the Start screen.
2. Click [All apps] on the app bar.
3. Click [Control Panel] under “Windows System”.
B Click [Clock, Language, and Region] - [Language] - [Add a language].
C Select a language, and then click [Add].
Depending on the region, two or more languages are selectable. Click [Open] and select the desired language,
and then click [Add].
D Click [Option] for the language you want to use.
E Click [Make this the primary language].
F Click [Log off now].
G Sign in to the Windows.
CPE02747ZA_CF-H2mk3_EU_OI_M.indb 19 2013/07/24 13:13:18