1 ABOUT LEAD FREE
SOLDER (PbF)
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a PbF
stamp on the PCB.
Caution :
•
• •
• Pb free solder has a higher melting point than standard
solder; Typically the melting point is 50 - 70°F (30 -
40°C) higher. Please use a soldering iron with
temperature control and adjust it to 700 ± 20°F (370 ±
10°C). In case of using high temperature soldering iron,
please be careful not to heat too long.
•
• •
• Pb free solder will tend to splash when heated too high
(about 1100°F/600°C)
•
• •
• This lead free solder will be used for the products after
serial No. 1,000,001.
2 FEATURES
•
• •
• Sound System with Spurting Realism
(2-channel or 4-channel Power Amplifier)
•
• •
• Powerful Heavy Bass
(Stereo/Mono Power Amplifier) : CY-M7052EN/CY-
M9054EN
•
• •
• Radio Data System (RDS)
•
• •
• Not support 8 cm discs
•
• •
• Not compatible with MP3/WMA
3 FUSE
•
• •
• Use fuses of the same specified rating (15A).
•
• •
• Using different substitutes or fuses with higher rating, or
connecting the unit directly without a fuse, could cause fire
or damage to the unit.
4 MAINTENANCE
•
• •
• Wipe the unit with a soft dry cloth.
•
• •
• Never apply volatile liquids such as benzine and thinner to
prevent damage.
5 NOTES
[RADIO BLOCK]
Do not align the AM/FM package block. When the package
block is necessary, it will be supplied already aligned at the
factory.
[CD DECK BLOCK]
This model has no servo alignment points because
microcomputer controls the servo circuit
6 DIMENSIONS
7 LASER PRODUCTS
3
CQ-C1120AN / CQ-C1120GN / CQ-C1110AN / CQ-C1110GN / CQ-C1100VN
To Next Page
Loading...
