Panasonic CQ-C5303N

28
27
E
N
G
L
I
S
H
CQ-C5303N
Balance/Fader
You can adjust the sound level among the right, left, front and
rear speakers.
Default: BAL (balance) CNT (centre)
FAD (fader) CNT (centre)
Setting range: 15 levels each and CNT (centre)
Press [VOLUME] (PUSH SEL).
Press [VOLUME] (PUSH SEL).
Audio Settings (continued)
SQ Adjustment
You can adjust the characteristics of the currently selected
sound type (SQ). (a Page 9)
It is also possible to preset up to 5 different adjusted SQs.
Tone/SQ adjustable range : – 12 dB to + 12 dB (by 2 dB)
SQ Low/Bass : ± 12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)
SQ Mid : ± 12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)
SQ High/Treble : ± 12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
¡ The bass/treble control level of each frequency is fixed to the
frequency that has been selected for SQ.
FTo return an adjusted SQ to the default setting
q Press and hold [MUTE] (SQ) for more than 1 second, and
select the SQ which is to be returned to the default setting.
w Press and hold [BAND] for more than 2 seconds.
Press [VOLUME] (PUSH SEL).
[MUTE] (SQ)
(Sound Quality)
[D] (DISP) (Return to the regular mode)
Press [VOLUME]
(PUSH SEL: select).
(Press [SEL] on the
remote control unit.)
Turn [VOLUME]. (Press [VOL
}] or
[VOL
{ ] on the remote control unit.)
[
[
]/[
]
]
[
{ ] / [ } ]
[BAND]
Preset Buttons [2] to [6]
Regular mode