61
For CS- A18MKD, CS-A24MKD and CS-A28MKD
12.7.2 Manual Control
• When the vertical airflow direction is set to Manual using the remote control, the automatic airflow is released and
the airflow direction louver move up and down in the range shown in the diagram.
• The louver can be adjusted by pressing the button to the desired louver position.
• When stop operation using the remote control, the discharge vent is reset, and stop at the closing position.
(Cooling and Soft Dry Operation Condition)
For CS-A9MKD and CS-A12MKD
For CS-A18MKD, CS-A24MKD and CS-A28MKD
(Heating Operation Condition)
For CS-A9MKD and CS-A12MKD
Closing
position
/ 135°
Lower limit for cooling mode
and soft dry mode
Horizontal
11°
16°
27°
21°
33°
Upper limit for
cooling mode and
soft dry mode
Closing
position
/ 148°
Lower limit for cooling mode
and soft dry mode
Horizontal
17°
22°
33°
28°
39°
Upper limit for
cooling mode and
soft dry mode
35°
Closing
position
/ 148°
Lower limit for heating mode/52°
Horizontal
Upper limit/17°
Closing
position
/ 135°
Lower limit for heating mode
Horizontal
11°
21°
50°
33°
62°
Upper limit for heating mode