38
14.2. Remote Control Button
14.2.1. SET BUTTON
• To check current remote control transmission code.
- Press for more than 10 seconds.
- LCD returns to original display if remote control does not operate for 30 seconds.
14.2.2. CLOCK BUTTON
• To change the remote control’s time format.
- Press for more than 5 seconds.
14.2.3. RESET
• To clear and restore the remote control setting to factory default.
- Press once to clear the memory.
14.2.4. TIMER
• To change indoor unit indicator’s LED intensity.
- Press continuously for 5 seconds.
14.2.5. TIMER
• To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F).
- Press continuously for 10 seconds.
To Next Page
Loading...
