Time Delay Safety Control
Starting Current Control
Anti-Freezing Control
Compressor Reverse Rotation Protection Control
Automatic Fan Speed Mode
7.2. Soft Dry Mode Operation
•
• •
•
The unit starts cooling operation until the room temperature reaches the setting temperature set on the Remote Control, and
then Soft Dry operation will start.
•
• •
•
During Soft Dry operation, the Indoor Fan will operate at Lo- speed.
•
• •
•
The operation will be switched on and off for up to 10 minutes “ON” and 6 minutes “OFF”. Once Soft Dry operation is turned
off, it stops for 6 minutes.
•
• •
•
Once the compressor stops, it will not start for 3 minutes during Cooling operation.
•
• •
•
Same as Starting Current Control for Cooling Mode operation.
•
• •
•
Same as Anti-Freezing Control for Cooling Mode operation. (For Soft Dry region, 6 minutes waiting is valid during compressor
stops.)
•
• •
•
Same as Compressor Reverse Rotation Protection Control for Cooling Mode Operation. (For Soft Dry region, 6 minutes waiting
is valid during compressor stops.)
When Automatic Fan Speed is selected at Remote Control during Soft Dry operation.
•
• •
•
Fan speed off and on at Lo- speed.
•
• •
•
Deodorizing Control.
16
CS-PV9CKE CU-PV9CKE / CS-PV12CKE CU-PV12CKE
To Next Page
Loading...
Need help?
General
