Panasonic CS-S9NKR - Remote Control Button; Clock Button

59
13.2 Remote Control Button
13.2.1 SET Button
• To limit set temperature range for COOL mode.
o Set temperature range selection
13.2.2 CLOCK Button
• To change the remote control time format:
o Press for more than 5 seconds
13.2.3 RESET (RC) Button
• To clear and restore the remote control setting to factory default.
o Press once to clear the memory
13.2.4 RESET (AC) Button
• To restore the unit’s setting to factory default.
o Press once to restore the unit’s setting
13.2.5 TIMER ▲
• To change indoor unit indicators’ intensity:
o Press continuously for 5 seconds.
13.2.6 TIMER ▼
• To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F)
o Press continuously for 10 seconds.