158
Figure 4 Figure 5
AC303
CN-WLAN
CN-TH
CN-STM1
CN-FM
6. Remove the Particular Piece
from the 3 hooks.
10. Remove the earth wire screw. 12. Detach all connectors as labelled from the
Main Electronic Controller. Then pull out the
Main Electronic Controller gently.
11. Pull out the Main Electronic
Controller halfway.
7. Remove the screw of the
WIFI Complete.
8. Detach the CN-DISP connector
then remove the Indicator Complete.
9. Detach the lead wires AC308 (Black),
AC307 (Brown), AC304 (Red) and
G301 (Green) from the Terminal Board.
Figure 3
To Next Page
Loading...
