Unit CS-W18CKE CU-W18CKE
Air Circulation Type Cross-flow Fan Propeller Fan
Material ASHT-18 PP
Motor Type Transistor (8-poles) Induction (4-poles)
Input W 53.5 130
Rated Output W 30 67
Fan Speed Low rpm Cooling; 1,160
Heating; 1,240
640
Medium rpm Cooling; 1,290
Heating; 1,290
—
High rpm Cooling; 1,380
Heating; 1,440
1,000
SuperHigh rpm Cooling; 1,440
Heating; 1,440
—
Heat Exchanger Description Evaporator Condenser
Tube material Copper Copper
Fin material Aluminium (Pre Coat) Aluminium (Blue Coat)
Fin Type Slit Fin Corrugated Fin
Row / Stage (Plate fin configuration, forced draft)
2×15 2×26
FPI 21 16
Size (W × H × L) mm 810 × 315 × 25.4 769.2
732.9
× 660.4 × 44
Refrigerant Control Device — Capillary Tube
Refrigeration Oil (cm
3
) — RB68A OR FRE0L ALPHA 68M
(670)
Refrigerant (R410A) g (oz) — 1,620 (57.2)
Thermostat Electronic Control Electronic Control
Protection Device — Inner Protector
Capillary Tube Length mm — Cooling; 1,180, Heating; 1,048
Flow Rate l/min — Cooling; 8.7, Heating; 14.0
Inner Diameter mm — Cooling; 1.5, Heating; 1.8
Air Filter Material
Style
P.P.
Honeycomb
—
Capacity Control Capillary Tube
Compressor Capacitor µF, VAC — 50 µF, 370VAC
Fan Motor Capacitor µF, VAC — 3.0 µF, 450VAC
Note:
•
• •
•
Specifications are subject to change without notice for further improvement.
7
CS-W18CKE CU-W18CKE / CS-W24CKE CU-W24CKE
To Next Page
Loading...
Need help?
General
