7.2. Wireless Remote Control (OPTIONAL PARTS)
NOTES:
•
• •
• Ensure that the correct button is pressed as simultaneous pressing of the multiple buttons will not make the setting correct.
•
• •
• The illustration above is for explanatory purpose only. The appearance will be different during actual operation.
•
• •
• If using the wireless remote control in conjunction with the wired remote control, the settings made from the wireless remote
control will appear on the wired remote control display (except when making timer settings).
•
• •
• Buttons marked with * are not needed for normal operation. If one of these buttons is pressed by mistake, press the same
button once more to cancel the operation.
•
• •
• When the power resumed after power failure, the unit will restart automatically with all previous settings preserved by the
memory function. (Auto restart function)
27
To Next Page
Loading...
Need help?
General
