7 OPERATING INSTRUCTION
7.1. Wired Remote Control (OPTIONAL PARTS)
NOTES:
•
• •
•
Ensure that the correct button is pressed as simultaneous pressing of the multiple buttons will not make the setting correct.
•
• •
•
The illustration above is for explanatory purposes only. The appearance will be different during actual operation.
•
• •
•
Do not operate the remote control with wet hands. Otherwise, electric shock or malfunction may occur.
•
• •
•
Do not press the remote control buttons with sharp object as this may damage the remote control.
•
• •
•
Buttons marked with * are not needed for normal operation. If one of these buttons is pressed by mistake, press the same
button once more to cancel the operation.
•
• •
•
When the power resumed after power failure, the unit will restart automatically with all the previous settings preserved by the
memory function. (Auto restart function)
25
To Next Page
Loading...
Need help?
General
