20
Cleaning instructions
To ensure optimal performance of the unit,
cleaning has to be carried out at regular
intervals. Dirty unit may cause malfunction
and you may see error code “H 99”. Please
consult authorised dealer.
• Switch off the power supply and unplug
before cleaning.
• Do not touch the aluminium fin, sharp parts
may cause injury.
• Do not use benzine, thinner or scouring
powder.
• Use only soap (
pH 7) or neutral household
detergent.
• Do not use water hotter than 40 °C / 104 °F.
Indoor unit
Wipe the unit gently with a soft,
dry cloth. Coils and fans should
be clean for at least every
6 months by an authorised
dealer.
Outdoor unit
Clear debris that surround the
unit. Clear any blockage from
the drain pipe.
Air filters
Once every 2 weeks
• Wash/rinse the filters gently
with water to avoid damage to
the filter surface.
• Dry the filters thoroughly under shade,
away from fire or direct sunlight.
• Replace any damaged filters.
Remove air filter Attach air filter
Insert into the unit
Indoor unit
POWERFUL
Aluminium fin
Front panel
Air filters
Front panel
Wash gently and dry.
Remove the front panel Close it securely
POWERFUL
1
Release the hooks at
both ends.
2
Pull out and lift up.
POWERFUL
1
Insert at
both sides.
2
Push in.
3
Close down.
4
Press both ends and center of the front panel.
ACXF55-18920_book1.indb 20ACXF55-18920_book1.indb 20 1/10/2018 11:59:39 AM1/10/2018 11:59:39 AM
To Next Page
Loading...
