Panasonic CZ-256ESMC3 - Settings after Completing Installation

12
Settings after completing installation
Basicsettingsow
1
Set the language and time zone on
this unit.
→Settingthelanguageandtimezone([Language/
Timezone settings]) P.14
2
Set the time and date on this unit.
→Settingthedateandtime([Datesettings])P.16
3
Conrmthecongurationoftheair
conditioning system.
→Conrmingsystemconguration([Check
conguration])P.17
4
Set addresses and group
memberships for the indoor units.
→Basicsettingsontheindoorunit([I/Dunitsettings])
P.18
5
Name the area groups.
→Changingthenameoftheareagroup([Areagroup
name settings]) P.21
Make settings for steps 6 to 9 as necessary.
6
Name the distribution groups.
→Changingthenameofthedistributiongroup
([Distribution group settings]) P.23
7
Register distribution groups to be
measured in the pulse meter.
→Basicsettingsforthepulsemeter([Pulsemeter
settings]) P.25
8
Set the mode used for distributing
when calculating charges.
→Setthedistributionmode([Distributionmodesettings])
P.27
9
Setspecieddays,cut-offdays,
and target time slots for calculating
distributions.
→Basicsettingsfordistributioncalculation([Calendr
sttngs for distr calc]) P.28
Settingnished
Setupowfordifferentoperatingstyles
: Settings required. : Settings may be required. : Settings not required.
Step Category step Setting Screen menu names
Operation
Air
conditioning
operations
only
Distribution rate
display only
Quantity used,
charges display
Time Load Time Load
1 Date settings Setting the current date and time Date settings
    
2
Composition
loading
Conrmingtheconnection
conguration
Checkconguration
    
3 Unit related
Central address*
1
I/D unit settings
    
Name of the indoor units I/D unit settings
    
Distribution group I/D unit settings
    
Area group I/D unit settings
*
2
   
Control group I/D unit settings
    
Not batch, not managed I/D unit settings
    
Name of the outdoor units O/D unit settings
    
Local remote controller prohibition
setting
A/C communication settings
    
4 Group related
Name of the area group Area group name settings
*
2
   
Name of the distribution group Distribution group settings
    
Name of the schedule group Schedule group name settings
    
5
Pulse meter
related
Association with the distribution
group
Pulse meter settings
    
Type of pulse meter (electricity/
gas), multiplying factor (number of
pulse units)
Pulse meter settings
    
Name of the pulse meter Pulse meter settings
  
 
CZ-256ESMC3_QR_EU.indd 12 2016/09/12 17:13:21