Panasonic CZ-256ESMC3 - Checking the Settings on the Indoor Unit

8
Checking the settings on the indoor unit
You can check the setting status of all indoor units connected to this unit in a list. You can also change the
display to show by area.
1
Touch [Operation/Status] in “Oper./
Status”.
1
2
Touch [I/D unit list].
z The “I/D unit list” screen is displayed.
2
3
Checking the status of settings.
z Refer to P.9 for details about the screen.
Note
y Youcanselectindoorunitstochangetheirsettings.(→“Changing
the settings on the indoor unit” (P.10))
Select the area to display
1
Touch [Area].
z The “Select Area” dialogue is displayed.
1
2
Select the area to display.
z If 9 or more area groups have been registered (P.21),
youcanscrollupordownbyswipingorickingthescreen.
z The “Select Area” dialogue is closed and the settings of the
selected area are displayed in the list.
2
CZ-256ESMC3_QR_EU.indd 8 2016/09/12 17:13:18