24
Changing the name of the distribution group
6
Touch [Register].
z The “Edit distribution group sttngs” dialogue closes.
z To cancel the settings, touch [Cancel].
6
7
Put a check mark in the “Valid” column.
z Put a check mark in the distribution group to use in
distribution calculations.
7
8
Touch [Register].
z To cancel the settings, touch [Cancel].
8
Note
y Do not put both “PAC” and “GHP” in a single distribution group with time distribution (P.27). Put each of them in separate groups.
CZ-256ESMC3_QR_EU.indd 24 2016/09/12 17:13:29
To Next Page
Loading...
