Panasonic CZ-256ESMC3 - Page 26

26
Basic settings for the pulse meter
Item Explanation
Distrib. Grp. Congureadistributiongrouptobemeasured.
The “Distrib. Grp.” dialogue is displayed when
you touch this. Select the distribution group to be
measured and touch [Select].
6
Touch [Register].
z The “Edit pulse meter sttgs” dialogue closes.
z To cancel the settings, touch [Cancel].
6
7
Put a check mark in the “Register”
column.
z Put a check mark next to the pulse meters you want to
enable.
7
8
Touch [Register].
z To cancel the settings, touch [Cancel].
8
CZ-256ESMC3_QR_EU.indd 26 2016/09/12 17:13:30