30
Basic settings for distribution calculation
1
Touch [RglrHourRnge stngs].
z The “Regular hour range settings” dialogue is displayed.
1
2
Touch the cell to be entered.
z You can select all of the time slots for a day of the week by
touching the day of the week column.
2
3
Set the start and end times.
z Use to set “Hours” and “Minutes”.
3
4
Touch [Set].
z The set time is displayed in the cell.
z To delete the set time slot, select the time slot to delete
and touch [Clear].
z To copy the set time slot, select the time slot to copy and
touch [Copy]. Next select the place you want to paste to
and touch [Paste].
4
5
Touch [Register].
z The “Regular hour range settings” dialogue closes.
z To cancel the settings, touch [Cancel].
5
6
Put a check mark next to “Valid”.
6
Set the target time slots for distribution calculation
CZ-256ESMC3_QR_EU.indd 30 2016/09/12 17:13:34
To Next Page
Loading...
