Panasonic CZ-RTC5A

15
(EN)
Timer Reservation
Weekly timer overview
You can set a weekly operation schedule.
• The operation ON/OFF schedule or temperature setting schedule can be set by
setting the day and time (e.g. Setting the operation start time to 8:00 a.m. from every
Monday to Friday.).
How to set (Overview)
(See P.16 for setting procedure)
• Select “Day”
• Select “Time”
* Select “Operation”
• Select “Temperature”
(Only for operations other than
ON/OFF)
*Operation • ON: Starts operation with the temperature set last.
• OFF: Stops operation.
• ON & TEMP: Starts operation with the specifi ed temperature.
• TEMP: Sets the temperature to the specifi ed temperature during
operation.
Combination examples
 1. Stop operation earlier on “No-overtime work
day”
8:00 17:00
8:00 22:00
ON
ON
OFF
ON
Weekday
No-overtime
work day
• The setting registered for 1 day can be copied to other days.
(P.19)
 2. Set the temperature higher after the fi xed time.
8:00 22:0017:00
ON (26 °C)
(28 °C)
ON &
TEMP
OFFTEMP
 3. Stop operation during lunch break.
8:00 22:0012:4512:00
ON ONOFF
OFF OFF
ON ON
 4. This Thursday is a holiday.
The timer can be disabled only for the specifi ed days with the
registered schedules kept. (P.16)
• Disable (
) the timer of the specifi c Thursday which falls on
a holiday.
• Enable ( ) the timer after the holiday is over.