46
(EN)
Rotation operation
Equalizes the operation time by stopping the operation in order. This
prevents the operation time from being uneven depending on the
refrigerant system.
Stand by Operation Stand by OperationOperation
Stand by Operation Stand by Operation Stand by
System2
System1
• The rotation operation can be set only when controlling the single (combination
of 1 outdoor unit and 1 indoor unit) 2 refrigerant systems of PACi by one remote
controller.
• The backup operation is a support operation performed by a refrigerant system in
standby mode when the room temperature does not reach the set temperature due
to poor performance or occurrence of an alarm.
Initial Settings
Rotation setting
To Next Page
Loading...
