42
(EN)
Initial Settings
Password change Temp sensor
Main/sub Vent output
Contact address
1
Display the menu screen.
To return to the previous screen
Press .
To return to the top screen
Press 2 times.
2
Select [Initial settings].
▲ ▼ →
3
Select the item to set.
▲ ▼ →
4
Enter the password as necessary.
▲ ▼ → ► →
(Repeat)
• Select the number with ▲▼ and move to
the next fi eld with ►.
Password change
5
Enter a new password.
▲ ▼ → ► →
(Repeat)
6
Enter the password again to
confi rm.
▲ ▼ → ► →
→
(Press 2 times to
fi nish.)
To Next Page
Loading...
