Panasonic CZ-RTC5A

27
(EN)
Absence operation mode
5
Select the item to set for when no
one is in the room.
▲ ▼ →
→
(Press 2 times to fi nish.)
 Types of the Absence operation mode
Select the Absence operation mode from among the following 4 options on the
remote control.
• Not set <Factory default>
If human activity is detected, the operation status is restored according to the level of
human activity.
• [Standby]
Pauses the COOL/DRY or HEAT operation, and performs only the FAN (slight breeze)
operation.
If human activity is detected, the operation status is restored according to the level of
human activity.
• [Stop (no restart)]
Stops the operation. After stopped, the operation is not resumed even if human activity is
detected.
• [Stop (restart)]
Stops the operation. After stopped, the operation is resumed if human activity is detected,
and the operation status is restored according to the level of human activity.
AbsncOp strt time
5
Set the time that elapses before
[Absence operation mode] starts.
hour minute
▲ ▼ → ► → ▲ ▼ →
→
(Press 2 times to fi nish.)
• 30 minutes to 3 hours* (180 minutes)
(by the 30 minutes)
* Factory default: 1 hour