29
(EN)
Circulation
5
Only when ECONAVI is off , select
[YES].
◄ ► →
6
Select the setting method.
▲ ▼ →
→
(Press 2 times to fi nish.)
Setting for all units
▲ ▼ →
→
(Press 2 times to fi nish.)
ON
OFF
Settings for individual units
▲ ▼ → ► → ▲ ▼ →
→
Note
To operate the “Circulation” in HEAT mode, set the fan speed
to [AUTO], and set the airfl ow direction to any one of [Direct
airfl ow], [
] and [F3,F4,F5].
In the following cases, each message appears and this function
cannot be used.
• When the indoor unit is not supported,
the motion sensor is not equipped,
or the fl oor temperature sensor is not
equipped
• Locked or prohibited
F1
F2
F3
F4
F5
To Next Page
Loading...
