Changetheremotecontrolcodeonthemainunitandtheremote
control(thetwomustmatch)ifyouplaceother Panasoaic products
close together.
Use "1", the factory set code, under normal circumstances.
1 Press [SETUP].
2 Press [4,, T] to select "Set Up" and
press [1_].
3 Press [4,, T] to select "Remote
Control Code" and press [ENTER].
4 Press [4,, Y] to select the code (1, 2,
or 3) and press [ENTER].
5
To change the code on the remote control
While pressing [ENTER], press and
hold the numbered button ([1], [2] or
[3]) for more than 2 seconds.
6 Press [ENTER].
• When the following indicator appears on the
unit's display
The unit's remote controI code
Change the code on the remote aontrot to match the main unit's
(.., step 5),
To exit the screen
Press [SETUP].
To return to the previous screen
Press [RETURN}.
To Next Page
Loading...
