15
VQT2J39
Quick Start 
Guide
Media handling (Disc/USB memory)
1 Press [< OPEN/CLOSE] to open the tray.
2 Press [< OPEN/CLOSE] to close the tray.
Automatic drive select function
[DVD-V] [VCD]
≥If the unit is recording to the HDD or stopped, it automatically 
switches to the DVD drive when a disc is inserted.
≥If you eject a disc and close the disc tray, the HDD drive is 
automatically selected.
≥When using DVD-RAM or DVD-R, remove the disc from the 
cartridge. Cartridge discs cannot be used.
≥[RAM] It is not possible to record or play continuously from one side 
of a double sided disc to the other. You will need to eject the disc 
and turn it over.
Inserting the USB memory
≥Before inserting any USB memory to this 
unit, ensure that the data stored therein 
has been backed up.
≥Check the orientation of the USB 
connector and insert it straight in.
≥Insert an USB device while the unit is 
stopped, so the “USB device” screen is 
displayed. Select an item and press [OK] 
to switch to the USB-related operations (> 28, 50, 51).
Removing the USB memory
≥Complete all USB-related operations and pull the USB memory 
straight out.
≥If a USB memory being accessed is pulled out, then the data may 
be damaged.
∫ How to hold a disc
Do not touch the recorded surface.
∫ If there is dirt or condensation on the disc
Wipe with a damp cloth and then wipe dry.
∫ Handling precautions
≥Be careful about scratches and dirt.
≥Do not attach labels or stickers to discs. (This may cause disc 
warping and un-balanced rotation, rendering it unusable.)
≥Write on the label side of the disc only with a soft, oil-based felt 
pen. Do not use ballpoint pens or other hard writing implements.
≥Do not use record cleaning sprays, benzine, thinner, static 
electricity prevention liquids or any other solvent.
≥Do not use scratch-proof protectors or covers.
≥Do not drop stack, or impact discs. Do not place objects on them.
≥Do not use the following discs:
– Discs with exposed adhesive from removed stickers or labels 
(rental discs, etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as 
heart shapes.
≥Do not place in the following areas:
– In direct sunlight.
– In very dusty or humid areas.
– Near a heater.
– Locations susceptible to significant difference in temperature 
(condensation can occur).
– Where static electricity or electromagnetic waves occur.
≥To protect discs from scratches and dirt, return them to their cases 
when you are not using them.
Inserting discs
Inserting, removing the USB memory
Note
Disc care
The manufacturer accepts no responsibility and offers no 
compensation for loss of recorded or edited material due to a 
problem with the unit or recordable media, and accepts no 
responsibility and offers no compensation for any 
subsequent damage caused by such loss. 
Examples of causes of such losses are
≥A disc recorded and edited with this unit is played in a DVD 
Recorder or computer disc drive manufactured by another 
company.
≥A disc used as described above and then played again in this 
unit.
≥A disc recorded and edited with a DVD Recorder or computer 
disc drive manufactured by another company is played in this 
unit.
DO
 
DO NOT
 
DO DO NOT
 
DO NOT
DMREX773EC-VQT2J39_eng.book  15 ページ  2010年1月14日 木曜日 午後1時31分