- 21 -
Preparation
Setting Date/Time (Clock Set)
We recommend selecting [LANGUAGE] (P32) from the [SETUP] menu (P27) before
setting date/time.
•
The clock is not set when the camera is shipped.
Press [MENU/SET].
Press 2/1 to select the items (year, month,
day, hour, minute or display sequence), and
press 3/4 to set.
A: Time at the home area
B: Time at the travel destination (P76)
‚: Cancel without setting the clock.
Press [MENU/SET] to set.
• After completing the clock settings, turn the camera off.
Then turn the camera back on, switch to recording mode, and check that the display
reflects the settings that were performed.
• When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the
“Changing the clock setting (In normal
picture mode)
” procedure below.
Turn the camera on.
• The [PLEASE SET THE CLOCK] message appears.
(This message does not appear in [PLAYBACK]
mode.)
A [MENU/SET] button
B Cursor buttons
1
ONOFF
A
B
/SET
MENU
2
:
:
3
4
To Next Page
Loading...
