9
3.2.1.2. About Main P.C.B. (Ref. 1) & Flash-ROM (IC6007)
Important:
1. Before replacing the "MAIN P.C.B. and/or Flash-ROM", proceed the EEPROM data backup from the unit. After replacing the
MAIN P.C.B. and/or Flash-ROM, overwrite the EEPROM data with backup data from the unit first, then proceed the adjust-
ment/inspection.
Refer to the adjustment instruction in the adjustment software for details.
2. The full adjustment must be performed after replacing the "MAIN P.C.B. and/or Flash-ROM", otherwise Picture quality can not
be meet with specification.
To Next Page
Loading...
