Wi-Fi/NFC
Sending pictures to a PC
SQW0206
- 224 -
■
To create a folder that receives images
• Create a PC user account (account name (up to 254 characters) and password (up to
32 characters)) consisting of alphanumeric characters. An attempt to create a receive
folder may fail if the account includes non-alphanumeric characters.
■
When using “PHOTOfunSTUDIO”
Install “PHOTOfunSTUDIO” on the PC
• “PHOTOfunSTUDIO” is not compatible with Mac.
• For details on operating environment and installation, read “About supplied
software” (→269) and “Installing supplied software” (→270).
Create a folder that receives images with
“PHOTOfunSTUDIO”
• To create the folder automatically, select [Auto-create]. To specify a folder,
create a new folder, or set a password to the folder, select [Create manually].
• For details, refer to the operating instructions of “PHOTOfunSTUDIO” (PDF).
■
When not using “PHOTOfunSTUDIO”
(For Windows)
Supported OS: Windows 8.1 / Windows 8 / Windows 7 / Windows Vista
Example: Windows 7
Select a folder you intend to use for receiving, then right-
click
Select [Properties], then enable sharing of the folder
• For details, refer to the operating instructions of your PC or Help on the
operating system.
(For Mac)
Supported OS: OS X v10.5 to v10.10
Example: OS X v10.8
Select a folder you intend to use for receiving, then click on
the items in the following order
[File] → [Get Info]
Enable sharing of the folder
• For details, refer to the operating instructions of your PC or Help on the
operating system.
To Next Page
Loading...
