Wi-Fi/NFC
Wireless printing
SQW0206- 219 -
You can send still pictures to a compatible printer and print them wirelessly.
■
Sending method, and pictures that can be sent
JPEG RAW MP4 AVCHD 3D
Sending selected pictures
[Send Images Stored in the Camera]
○ – – – –
• Some images may not be played back or sent depending on the device.
• For more details about picture sending methods. (→257)
Preparation:
• You can print out recorded still pictures wirelessly from a PictBridge (wireless LAN-
compatible)
*
printer.
*
Compliant with the DPS over IP standards. Contact the printer manufacturers for details on
PictBridge (wireless LAN-compatible) printers.
Select [New Connection] in the [Wi-Fi] menu, and press
[MENU/SET] (→61)
Use cursor button to select [Send Images Stored in the
Camera], and then press [MENU/SET]
Use cursor button to select [Printer], and then press
[MENU/SET]
Select [Via Network] or [Direct] to connect (→249)
Select the printer you want to connect and then press
[MENU/SET]
Press [MENU/SET]
Select the still picture and print
• Pictures are selected the same way as when connecting by USB connection
cable. For more details (→275).
• To change the setting or disconnect, press [Wi-Fi] button. (→190)
●
Motion pictures cannot be printed out.
To Next Page
Loading...
