13
VQT3C18
Getting started
Before connection, consult your car owner’s manual or your
dealer.
≥ Connect to the cigarette lighter socket of a vehicle that has a
12 V battery. It is not compatible with a vehicle that has a
24 V battery.
≥ This is a special negative grounded Car DC Adaptor. Using
this Car DC Adaptor with a plus grounded car can cause
malfunction and lead to fire.
1 Connect the car DC adaptor to the unit.
2 Connect the car DC adaptor to the cigarette
lighter socket.
Replacing the fuse
Replace only with the specified 125 V/250 V, 3.15 A fuse.
Use of any other type can cause fire.
1 Open the socket.
2 Replace the fuse.
3 Close the socket.
Cautions
≥ To avoid draining your car battery
jDisconnect the Car DC Adaptor from the cigarette lighter
after use. The Car DC Adaptor continues to consume some
power even if it is not being used, and if a battery pack is
attached to this unit, it will start recharging which uses
more power.
jDo not use the Car DC Adaptor for long periods when the
engine is not running.
≥ Leave some slack in the cord.
≥ No responsibility will be taken for damage that occurs due to
faulty installation.
Connecting the supplied Car DC
Adaptor
Car DC Adaptor (supplied)
DMPB200EB-VQT3C18_eng.book 13 ページ ２０１１年１月２４日 月曜日 午後８時３２分
To Next Page
Loading...
Need help?
General
