33
VQT3C18
Settings
TV System
Change the setting to match the equipment you are connecting
with.
≥ If picture output is not smooth, change the setting.
Quick Start
Speed of startup from standby mode is increased.
≥ Quick Start only functions when the AC adaptor is connected.
Energy Saving Settings
Press [OK] to show the following settings.
Easy Setting
You can execute basic settings
(“On-Screen Language”* and “Quick Start”).
* Only for the United Kingdom, Ireland, Continental Europe
and Asia.
Default Settings
This returns all values in the Setup menu and the on-screen
menu, except for “On-Screen Language”*, “DVD-Video
Ratings” and “BD-Video Ratings” to the default settings.
* Only for the United Kingdom, Ireland, Continental Europe
and Asia.
DivX Registration
[DivX] (> 21)
You need this registration code to purchase and play DivX
Video-on-Demand (VOD) content.
System Information
Display firmware version of this unit.
HDMI Output Range
Effective when connected to a device that only supports
RGB output.
! Standard
:
The video is output as it is.
! Enhanced:
When the black and white contrast of a video is low, the
signal is enhanced to reproduce clear video.
HDMI Audio Output
Set whether or not to output audio from the HDMI AV OUT
terminal.
! On
! Off
VIERA Link
Set to use “HDAVI Control” function when connected with an
HDMI cable to a device that supports “HDAVI Control”.
! On
! Off:
Select when you do not want to use “HDAVI Control”.
Contents Type Flag
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that supports this
function is connected.
! Automatic
! Off
! NTSC
:
Select when connecting to a NTSC television.
! PAL:
Select when connecting to a PAL or multi-system
television.
[For[Australia[and[New[Zealand]
The default setting is PAL.
Others
! On:
Since internal control unit will be powered, power
consumption in standby mode (> 42) will increase in
comparison to when “Off”.
! Off
Automatic Standby (No Action)
Select whether the unit is automatically turned off when
about 15 minutes (about 5 minutes when using the battery
pack) have elapsed while stopped.
! On
! Off:
Select when you do not want to use this function.
ECO-charge
Charging of the battery pack will be controlled to 80 % when
set to “On”, and therefore prevent exhaustion of the battery
pack.
! On ! Off
! Yes ! No
! Yes ! No
VQT3C18~Body1_mst.fm 33 ページ 2011年1月27日 木曜日 午前11時47分