To
select
these
options,
perform
steps
0-0
(~
32)
"Audio"
Dynamic
Range
Compression
ImI!I
~
DmD
B!EI
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
Change the dynamic range
(q
50) for late night viewing.
Digital
Audio
Output
(~
8)
- Press
[OKJ
to
show the following settings.
-On
-Auto:
-Off
Effective only when Dolby TrueHD
is
played.
Dolby
D/Dolby 0 +/
Select
whether
Dolby
Digital,
Dolby
Dolby
TrueHD
Digital
Plus,
Dolby
TrueHD,
DTS
Digital
DTS/DTS-HD
Surround,
DTS-HD
High
Resolution
Audio
or
DTS-HD
Master
Audio
is
output
in
"Bitstream"
or
"PCM"
format.
- Not making the proper settings may
result
in
noise.
-If
the unit is connected with the
HDMI
AV
OUT terminal, the
specifications of the connected
equipment take preference over this
unit and audio selected
in
these
items may not be output (e.g., when
a television
is
connected, the HDMI
audio output
of
this unit
is
limited
to
down-mixed 2ch.)
SO-Video
Secondary
Audio
ImI!I
Turn on/off the button click sound
on
the menu and audio with
secondary video
in
picture-in-picture mode.
(q
22)
PCM
Down
Conversion
Select how to output audio with a sampling frequency of 96 kHz.
- Signals are converted
to
48 kHz despite the settings across
in
the following cases:
-when
the signals have a sampling frequency of 192 kHz
-when
the disc has copy protection
-when
"BD-Video Secondary Audio"
is
set
to
"On"
-Bitstream:
Select "Bitstream" when the connected equipment can decode the
respective audio format.
-Connect
equipment supporting HDMI (High Bit rate Audio) and use a
High Speed HDMI Cable
in
order
to
output high bit rate audio such as
Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio
or
DTS-HD Master Audio.
-PCM:
Select "PCM" when the connected equipment cannot decode the
respective audio format.
Refer
to
the operating instructions for connected devices
to
verify whether or
not they can decode each of the audio formats.
-On:
The primary audio and secondary audio are mixed and output. The
sampling frequency
is
converted
to
48 kHz.
- Off: The button click sound
on
the menu and secondary audio are not
output.
-On:
Signals are converted
to
48
kHz. (Choose when the connected
equipment cannot process signals with sampling frequency of
96 kHz.)
- Off: Signals are output as 96 kHz. (Choose when the connected
equipment can process signals with sampling frequency of
96 kHz.)
- Stereo: When connected
to
equipment that does not support
the virtual surround function.
-Surround
encoded: When connected
to
equipment that supports the
virtual surround function (Dolby Pro Logic, DTS
Neo:
6,
etc.).
Downmix
Switch the downmix system for playing back multi-channel
surround sound.
-When
"Dolby D/Doiby D +/Dolby TrueHD" or "DTS/DTS-HD" is
set
to
"Bitstream", there are no downmix effects for the outputted
audio.
-The
audio will be outputted
in
"Stereo"
in
the following cases.
-AVCHD
playback
-Playback
of button click sound
on
the menu and audio with
secondary video
in
picture-in-picture mode
High
Clarity
Sound
~D80J
When the analog video terminal
is
not being used, the electrical
current that flows through the analog video circuit can be stopped.
This prevents adverse effects
on
the audio signals and produces
clearer sound.
-Set
to
"Enable" and then set "High Clarity Sound"
on
the
on-screen menu
to
"On".
(q
31)
-Use
this when outputting image via HDMI terminal. Analog image
will not be output via COMPONENT VIDEO OUT terminal
or
VIDEO OUT terminal.
"Display"
-Enable
-Disable
Status Messages
-Automatic
-Off
Choose whether
to
show status messages automatically.
On-screen
Language
-English
-Franyais
-Espanol
Choose the language for these menus and on-screen messages.
Screen Saver
Function
-On:
This is
to
prevent burn-in
on
the screen.
If there is
no
operation for
10
minutes or more. the displayed screen
-When
this
is
set
to
"On", the masked-off area
on
the screen
switches to the other states automatically.
becomes gray.
- When the Direct Navigator or FUNCTIONS menu
is
displayed, the
[Only when connecting with an HDMI cable or a component video
display returns to the screen saver mode.
cable and "HDMI Resolution"
(q
34)
is
set
to
any other mode
- When
CD
or MP3 is played, the display returns
to
the screen saver
than "480p", or "Component Video Resolution"
(q
34)
is
set to
mode, (Playback continues.)
"720p" or
"1
080i"J
-When
still pictures are shown (except for slideshow), the display returns
to
the Direct Navigator screen,
-Off
(Continued
on
the
next
page)
33'
RQT9378
To Next Page
Loading...
