16
VQT3B75
STEP 6 :
Reprogramming the
remote control
If you have more than one Panasonic player/recorder and
the remote control operates both products at once, you will
need to change the remote control code on one product to
prevent this occurrence. (> 34, “Remote Control”)
You can operate the TV using the unit’s remote control.
1 Input the 2-digit code (> 40) with the
number buttons while pressing [Í TV].
e.g., 01: [0] B [1]
2 Test by turning on the television.
≥ If your television brand has more than one code listed, select the one
that allows correct operation.
Playback
Inserting or removing
media
≥ When inserting a media item, ensure that it is facing the
right way up.
≥ When removing the SD card, press on the centre of the
card and pull it straight out.
≥ If you connect a Panasonic product with a USB
connection cable, the setup screen may be displayed on
the connected equipment. For details, refer to the
instructions for the connected equipment.
For other Panasonic products
For TV
DMP-BDT310_110EB-VQT3B75.book 16 ページ ２０１１年２月２１日 月曜日 午後５時１７分
To Next Page
Loading...
