Panasonic DMP-BDT500 - Connecting to a TV (STEP 1); HDMI AV OUT Connection (High Quality); VIDEO OUT Connection (Standard Quality)

10
VQT3W07
Connections and settings
STEP 1 : Connecting to a TV
Perform either one of the following connections in accordance with your TV input terminal.
≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC
power.
≥ Do not connect video signals through a video recorder. Due to copy guard protection the picture may
not be displayed properly.
It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use
HDMI cables 5.0 meters or less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.
≥ Use HDMI AV OUT MAIN terminal.
≥ Connect terminals of the same colour.
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 3 BEFORE
CONNECTION.
HDMI AV OUT (High quality)
HDMI cable
HDMI IN
VIDEO OUT (Standard quality)
Audio/Video cable
VIDEO IN
AUDIO IN
L
R
DMP-BDT500EB-VQT3W07.book 10 ページ ２０１２年２月２４日 金曜日 午後４時１７分