Getting started
7
VQT3W07
Control reference guide
1 Standby/on switch* (Í/I) (> 14)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2 Display
3 CALL LED
The LED will light up when this unit receives
incoming call etc. of the video
communication. (> 23)
4 V.OFF LED (Video off LED)
It is possible to set the LED to turn on/off.
(> 35)
5 Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20e up and down, 30e left and
right
6 Disc tray (> 17)
7 Open or close the disc tray* (> 17)
8Stop* (> 19)
9 Start play* (> 19)
10 SD card slot (> 17)
11 USB port (> 17)
* These buttons work just by touching the marks.
The volume of operation sound can be adjusted by “Unit
Operation Volume” . (> 35)
ヰヱユワチ
チヤロヰヴユ
チ
1
2
3
4
6
9
8
7
5
19
18
20
21
16
14
15
17
13
12
11
10
1 Turn the unit on and off
2 TV operation buttons (> 16)
You can operate the TV through the unit’s
remote control.
[Í TV] : Turn the television on and off
[AV] : Switch the input select
[ijVOL] : Adjust the volume
3 Show the Home screen of the VIERA
Connect (> 23)
4 Select title numbers, etc./Enter numbers or
characters
5 Cancel
6 Basic playback control buttons (> 19)
7 Show Top menu (> 21)
8 Show HOME menu (> 17)
9 Touchpad (> 8)
Used for various operation
Move the highlight, confirm the selection, etc.
10 Show Option menu (> 27)
11 Coloured buttons (red, green, yellow, blue)
Used for various purposes depending on the
display
12 Video option buttons (> 28)
13 Transmit the remote control signal
14 Open or close the disc tray (> 17)
15 Show status messages (> 21)
16 Show NETFLIX screen (> 23)
17 Start up a video communication (> 23)
18 Select audio (> 19)
19 Show Pop-up menu (> 21)
20 Show KEYS screen on the screen (> 9)
21 Return to previous screen
Pull to flip down the
front panel.
DMP-BDT500EB-VQT3W07.book 7 ページ ２０１２年２月２４日 金曜日 午後４時１７分
To Next Page
Loading...
